Anycubic Ultrabase 3D Printer Platform with Aluminum 12V/24V Dual Power MK3 Heatbed, Tempered Glass Plate, Durable Build Surface for Prusa i3 220x220mm

Note:
* Suggested bed temperature may vary depends on the filament material;
* Please properly level the bed before printing;
* Never let the nozzle rub against the Ultrabase directly, it will demage the nozzle or lead to clogging;
* Clean the platform surface with alcohol/water.

Temperature settings for different filaments:
1. PLA:50-70℃
2. Flexible filament: 50-70℃
3. ABS:100-125℃ ( 110℃ is recommended )
4. PC:100-130℃ ( 120℃ is recommended )
5. Nelon:90-120℃ ( 110℃ is recommended )
6. PP:100-130℃ ( 120℃ is recommended )
7. PETG: 50-70℃

Usage of Ultrabase Heatbed Kits:
Please kindly visit :
Official Web: www.anycubic3d.com
Youtube Channel: www.youtube.com/watch?v=zDup0gp9pLA

Specification:
Material: Tempered glass/Inorganic coating/Aluminum
Heatbed Power:140-145w
Voltage:12V/24V
Max Temperature:120 Degree Celsius 
Resistance around 0.9 ohm for 12V 
Resistance around 3.6 ohm for 24V
Item size: Tempered Glass 220x220x4mm ;Aluminum Heatbed 220x220x1.5mm
Thickness:approx. 5.5mm
Item weight:750g
Package Weight :870g

Package List:
1x ANYCUBIC Ultrabase 3D Printer Platform with Heatbed
4x M3X35 Screws
4x M3 nuts
4x Spacers

Product Features

  • Excellent adhesion: Ultrabase covered by microporous coating, shows strong adhesion in printing. Easy to take off models by hand or with a little help from the scrapper for very large models.
  • Good Flatness: Ultrabase is glass-based and the critical tolerance is ±0.2mm. (normally within the 0.1mm range).
  • High Durability: The special coating is inorganic and has a hardness of 8 Mohs, and it is capable to work at 400℃.
  • Easy to clean: Ultrabase is easy to clean by alcohol/water.
  • Compatibility: Ultrabase is compatible with most Cartesian style 3D printers (Build surface size :220x220mm)

Click Here For More Information

Published by

Best 3D Printer Specialist

3D Printing. The next Goldrush is on it´s way. Inside information on how to start printing in 3D, where to buy Printers, how to use them, and the newest Pictures and reviews of available 3D Printers.

2 thoughts on “Anycubic Ultrabase 3D Printer Platform with Aluminum 12V/24V Dual Power MK3 Heatbed, Tempered Glass Plate, Durable Build Surface for Prusa i3 220x220mm”

  1. GREAT PRINTER BED!!!!! I don’t typically write reviews, but this deserves one. The quick summary is, after a few days of use and about a dozen prints, it’s pretty fantastic.Pros:1. Once heated, initial layers stick very well. Like permanent bond well.2. Once cooled prints come off pretty much with the flick of a finger.3. Leaves a nice smooth bottom layer.Cons:(these are minor IMO)1. It seems you must heat the bed for adhesion, even for PLA2. It doesn’t come…

Comments are closed.