Ardokit DC 3.6V-6V To 400KV Boost Step Up Power Module High Voltage Generator

DC 3.6V-6V To 400KV Boost Step Up Power Module High Voltage Generator

Feature:

The high-voltage module uses the principle Tesla coil is made of high-voltage pulse output voltage current- small size- high efficiency- simple external circuit(just plug in the switch- the battery can be) discharge intensity violent.

Specification:

Input voltage: DC 3.6V – 6V
Output voltage: DC 400KV – 600KV(Please note that when security)
High type: pulse current
High voltage bipolar discharge distance: 10mm – 20mm
Output voltage lines length: about 100mm
Input power cable length: about 10mm (red is positive)
Dimensions : Φ24 x 63mm

Power:

3.7V Li-ion battery can be used single or two series- such as 18650- idle cell phone batteries ( to remove the protection board – the proposed capacity of 2000mAh or more ) or NiCd / NiMH battery pack- 4V or 6V lead acid batteries.

This module is a small production with high-pressure science inverter transformer / booster finished module- the input terminal DC 3V – 7.2V can get 20KV DC high voltage (about 1-2 cm arc) at the output can be used as high school science experiments – electronic equipment- negative ion generator- high voltage source to use when making small science.

Note:

Avoid high-pressure high-voltage module load electricity use. Must adjust the high voltage side suitable distance (before electricity- battery voltage and capacity is proportional to the distance from high-voltage arcing used when testing the arc distance from short to long experiment- prohibited from beyond the arc when powered up- the energy can not be released due to high pressure- easily damage the module)

Due to power- the internal heat is not easy- every power-on time should be controlled within a minute.

Determine whether the battery capacity can be driven

Product Features

  • The high-voltage module uses the principle Tesla coil is made of high-voltage pulse output voltage current, small size, high efficiency, simple external circuit(just plug in the switch, the battery can be) discharge intensity violent.

Detailed Information available on our Homepage…

Published by

Best 3D Printer Specialist

3D Printing. The next Goldrush is on it´s way. Inside information on how to start printing in 3D, where to buy Printers, how to use them, and the newest Pictures and reviews of available 3D Printers.

3 thoughts on “Ardokit DC 3.6V-6V To 400KV Boost Step Up Power Module High Voltage Generator”

  1. fun, and a little terrifying, you should buy one I will be updating my rating if and when I can verify the voltage output on this item. For now all I can say that is that I am blown away. This step up can easily create .5″ snapping sparks when powered off of a single AAA. Frankly, it’s a bit scary. I own 2, I had originally bought one with the intent of using it to charge myself and give static electricity demonstrations…..it’s way overpowered for this task. Eventually I’ll get the nerve up to add some resistors and attach it to myself…

Comments are closed.