SIM&NAT 12inch / 30cm 40 Pin Male to Female Dupont Wire, 40 Pin Male to Male, 40 Pin Female to Female Breadboard Jumper wire Ribbon Cables kit for Arduino Raspberry Pi 2 / 3 (120 PCS)


Features:
Material:Copper wire
The wires are easy to peel apart and great for making good looking prototypes
soft and flexible

Applications:
Work on a Raspberry pi breadboard projects, Raspberry pi robot build, Breadboard prototyping, Arduino and ky-040 rotary encoders.
Insert onto the SW LED pin on the typical desktop computer mother board.
Test bread boarding projects or for any breadboard experimenter.
Fit into a 3-pin JST.

Package Included:
1 * 11.8 inch 40 pin male to male Breadboard Jumper Wires
1 * 11.8 inch 40 pin female to female Breadboard Jumper Wires
1 * 11.8 inch 40 pin male to female Breadboard Jumper Wires

Product Features

  • Length: 30cm/11.8 inch
  • The pitch of each end of the wire is 0.1 inch (2.54mm)
  • 40 pin jumper Wire are easy to separate from the ribbon
  • Suitable for Arduino breadboard kit project, PCB project, PC motherboard, DIY experiment, 3D printer and etc.
  • Package content: 1 * 40 pin male to female jumper wires, 1 * 40 pin male to male cable and 1 * 40-pin female to female cable (total 120pcs)

Click Here If You Need More Detailed Info…

Elegoo UNO Project Super Starter Kit with Tutorial for Arduino

Elegoo Inc. is a professional manufacturer and exporter that is concerned with the design, development production and marketing of arduino, 3d printers, raspberry pi and STM32.
Our Dream is to make the best price and best quality produce for customers.
So we would like to receive your valuable suggestions for our products and we can improve them for you.

Component listing:
1pcs UNO R3 Controller Board
1pcs LCD1602 Module ( with pin header)
1pcs Breadboard Expansion Board
1pcs Power Supply Module WARNING: Pls. do not use the voltage higher than 9V
1pcs Joystick Module
1pcs IR Receiver
1pcs Servo Motor (SG90)
1pcs Stepper Motor
1pcs ULN2003 Stepper Motor Driver Board
1pcs Ultrasonic Sensor
1pcs DHT11 Temperature and Humidity Module
1pcs 9V Battery with DC
1pcs 65 Jumper Wire
1pcs USB Cable
1pcs Active Buzzer
1pcs Passive Buzzer
1pcs Potentiometer
1pcs 5V Relay
1pcs Breadboard
1pcs Remote
1pcs Tilt Switch
5pcs Button (small)
1pcs 1 digit 7-segment Display
1pcs 4 digit 7-segment Display
5pcs Yellow LED
5pcs Blue LED
5pcs Green LED
5pcs Red LED
1pcs RGB LED
2pcs Photoresistor
1pcs Thermistor
2pcs Diode Rectifier (1N4007)
2pcs NPN Transistor (PN2222)
1pcs IC 74HC595
120pcs Resistor
10pcs Female-to-male Dupont Wire

Product Features

  • Free PDF tutorial(more than 22 lessons) and clear listing in a nice package
  • The most economical way to starting Arduino programming for those beginners who are interested
  • Lcd1602 module with pin header (not need to be soldered by yourself)
  • This is the upgraded starter kits with power supply module, 9V battery with dc
  • High quality kite with uno R3, 100 percent compatible with Arduino uno R3

Click Here If You Need More Detailed Info…

Elepwal 3D Printer, XY100 Desktop High Precision 3D Printer Kit DIY Self Assembly i3 Acrylic Frame with LCD Display Supported ABS/ PLA/ TPU/ Wood/ HIPS/ PVA/ Nylon Filament for Beginners

Features:

100% Brand new and high quality!

International standard,safety and convenience.

2GT wear resisting rubber,aluminium 16 teeth pulley gear.

High precision 0.4mm  0.2mm 0.3mm.

Flexible support,extrusion power adjustable.

High compatibility and super stable performance.

Specifications:

Plug:US

Item Color:black

Item Size:365*340*360mm

Package Size:357*337*152mm

Structure: Acrylic

Print size: 120*140*130mm

Power:100V-240V 5A

Printing support: Secure Digital Memory Card / USB

Layer thickness precision:0.1-0.4mm

Printing speed: 20-150mm/s

Nozzle diameter: 0.4mm  0.2mm 0.3mm

Package Included:

1 X Elepawl 3D Printer

1 X Top Plate

2 X Side Plate

1 X Base Frame Holder(Front&back)

2 X Junction Plate

6 X Sliding Rod Restriction

1 X LCD Display

1 X Screw Pack

4 X Thumb Nuts

4 X Compression Springs

1 X USB Cable

1 X Secure Digital Memory Card

1 X Hexagon Socket Key

1 X Flat Blade Screwdriver

1 X Crosshead Screwdriver

Product Features

  • Elepawl 3D Printer is a great DIY kit to provide you an unforgettable step-by-step learning experience of 3D printer from scratch, alos perfect for kids to excite their potentiality and creativity
  • Equipped with Large Printing Area of 120*140*130mm and nozzle diameter of 0.4/0.2/0.3mm for high precision print, maintain the garage-built feel and the handmade charm
  • XY Axis printing moving speed is 3000mm/s; Z Axis is 200mm/s;The print speed is 40-120mm/s, shortening the time and improve the print effeciency
  • Supported multiple filaments such as PLA, ABS, HIPS, WOOD, PVA, Nylon
  • Suitable for a wide range of customers, young or old, professional or amateur,the best gift to the people who love creating and art

Click Here If You Need More Detailed Info…

Longruner GRBL CNC Shield Expansion Board V3.0 +UNO R3 Board + A4988 Stepper Motor Driver With Heatsink for Arduino Kits (Arduino Kits)

CNC Shield Board: Latest Arduino CNC Shield Version 3.0 GRBL 0.9 compatible 4-Axis support (X, Y, Z , A-Can duplicate X,Y,Z or do a full 4th axis with custom firmware using pins D12 and D13) 2 x End stops for each axis (6 in total) Coolant enable Compatible with A4988 or DRV8825 stepper driver Runs on 12-36V DC Arduino UNO R3 Board: MCU: ATmega328 USB interface: ATmega16U2 Operating voltage: 5V Digital I/O pins: 14 (including 6 with PWM capability) Analog input pins: 6 I-I/O pin output current: 40mA max 3.3V output current: 150mA max Flash memory: 32 kB (0.5kB used by bootloader – included) Static RAM (SRAM): 2 kB EEPROM: 1 kB Clock speed: 16MHz A4988 Stepper Motor Driver: A4988 Stepper Motor Driver Board is a breakout board for Allegro’s A4988 DMOS Micro stepping Driver with Translator and Overcurrent Protection; Low RDS (On) Output : Automatic current decay mode detection / selection Mix with slow current decay modes Synchronous rectification for low power dissipation Internal UVLO Crossover-current protection 3.3 and 5 V compatible logic supply Thermal shutdown circuitry Ground fault protection Load short-circuit protection Five selectable step modes: full, 1/2, 1/4, 1/8 and 1/16 Warning: Connecting or disconnecting a stepper motor while the driver is powered can destroy the driver. (More generally, rewiring anything while it is powered is asking for trouble). Package Contents: 1 x CNC Shield Board 1 x UNO R3 Board for Arduino 4 x A4988 Stepper Motor Driver 4 x Heat Sink

Product Features

  • Latest CNC Shield Version 3.0 for Arduino.
  • Arduino UNO R3 Board, MCU: ATmega328, USB interface: ATmega16U2.
  • PWM Spindle and direction pins. 4-Axis support. Runs on 12-36V DC.
  • 2 x End stops for each axis (6 in total).
  • 4Pcs A4988 Stepper Motor Driver with radiator.

Click Here If You Need More Detailed Info…