Excelvan New 3D Printer Printing Filament 1.75mm PLA for Print RepRap MarkerBot 1kg/2.1lbs (Yellow & Green)

Description

This is the best filament on the market. The 1.75mm filament holds a diameter tolerance of 0.02mm/0.0008″” which improves reliability and quality of output and comes vacuum-sealed with the desiccant on a 1kg (2.2lb) reel. We tested many filaments at both 100-micron and 200-micron layer resolutions on FDM printers and found this one is the best.

Features:

1. Compatible with all FDM 3D printer such as Makerbot, Mendel, Prusa, Huxley, BFB series, RepRap, Rapman, Solidoodle etc.

2. Avaliable in both 1.75mm and 3.00mm diameter. Filament Diameter Tolerances: +/-0.02mm.

3. Air Bubbles: Zero!

4. All the filaments should be placed in dry and ventilated environment to keep. And PVA filament should be kept in sealed.

Specification:

Material:PLA

Print Temp: 190-220°C (374-428°F)

Baseplate Temp: No heat

Diameter: 1.75mm

Tolerance: ±0.02mm

Net Weight: 1KG (2.2lbs)

Gross Weight: 1.3KG(2.9lbs)

Package includes:

1. 1x 3D printer filament

2. 1x leather box

Product Features

  • Specification: Diameter: 1.75 mm / Tolerance: +/-0.02mm / Print temperature: 190-220°C (374-428°F) / Bubble: No bubble 100 percent / Net weight: 1kg/spool / Gross weight: 1.3kg/spool
  • Diameter Tolerances: Our filament quality is very good with tolerances only: +/-0.02mm.
  • Our PLA filaments DO NOT have air bubbles.
  • Material: PLA allows higher print speed, more accurate placement of material with proper cooling (it does not shrink as much) and also thinner build heights because of less resistance from the plastic coming out the nozzle, where abs even at high temps (252C) is still sticky and has high viscosity.
  • Compatible with all FDM 3D printer such as Makerbot, Mendel, Prusa, Huxley, BFB series, RepRap, Rapman, Solidoodle etc.

Check Out Our Website For Details…

Published by

Best 3D Printer Specialist

3D Printing. The next Goldrush is on it´s way. Inside information on how to start printing in 3D, where to buy Printers, how to use them, and the newest Pictures and reviews of available 3D Printers.

2 thoughts on “Excelvan New 3D Printer Printing Filament 1.75mm PLA for Print RepRap MarkerBot 1kg/2.1lbs (Yellow & Green)”

  1. Its a dark green not a bluish green as pictured, they said they would change picture. Sometimes when I get a spool of filament, especially when getting one this size, they tend to last very long, as I do not print enough to use the spools quickly. This double color spool is great for me, because not only do I still technically get the same amount of filament, but there are 2 colors instead of just one. So I can print something in black, then red, then black again, without having to swap spools or get 2 spools. Both colors are in the same spool, with a divider, meaning you can’t…

  2. I have printed several multi-hour prints using my standard conditions for PLA (210C for hot end, 50C print bed, fans on) with no issues on my Replicator2 dual clone. The filament measures uniformly at 1.74mm on my calipers. No issues with jams, uncoiling, part adhesion (printers tape works great for PLA), or any bubbles. This is a inexpensive way to get a bunch of extra colors for the kids or demos. Keep in mind that once printed, the parts will be slightly lighter than the shipped/pictured…

Comments are closed.