SainSmart Red Copper Metal 1.75mm Filament for 3D Printing, 0.5kg/1.1lbs

SainSmart 3D Printer Filament

SainSmart 3D Printer Filament provides quality ABS/ PLA/ PVA/ HIPS/ PETG/ TPU/ Wood/ Metal 3D filament with vibrant colors. It is professional to enable you to see your thoughts and concepts engineered into a real and rewarding reality.

This filament is always round, with no oily residue, no air bubbles, and it comes loaded on a quality spool.
The quality of the filament is of great quality, and no kinks or breaks. Best choice for perfect printing!

Features:

* Widely used in health care, education, toys, building, automobile, electronics, anime field, etc.
* For common 3D printers such as Reprap, FlashForge, MakerBot,Afinia,Solidoodle 2,Printrbot LC,MakerGear M2, UP! and more.

Frequently Asked Questions

1) Filament not extruding properly?
A: Check the type of filament you’re working with and set the proper extruder temperature based on the filament type and heated build platform if applicable; trial and error. Rule of thumb is to set the extruder temperature to the highest temperature for the specific filament, then decrease the temperature by 5°C until properly extruded. Please note this will vary with each 3D printer.

2) How do I store my filament?
A: Most filaments tend to absorb moisture from the air; because of this your filament can become brittle and slowly degrade the quality. It’s recommended to keep unused filament and store it in a storage container or zip lock bag with a desiccant.

3) Is your filament tangled?
A: Check that the spool is spinning smoothly on the mount.

Product Features

  • 40% Real Red Copper,60% PLA
  • 0.5 KG (Approximately 1.10 lbs) Spool
  • 1.75mm Filament Diameter (Dimensional Accuracy +/- 0.05mm)
  • Recommended Extrusion/Nozzle Temperature 190°C – 200°C (374°F – 392°F)
  • Can be grinded and polished ; Fine gloss and corrosion resistance

Check Out Our Website For Details…

Published by

Best 3D Printer Specialist

3D Printing. The next Goldrush is on it´s way. Inside information on how to start printing in 3D, where to buy Printers, how to use them, and the newest Pictures and reviews of available 3D Printers.

One thought on “SainSmart Red Copper Metal 1.75mm Filament for 3D Printing, 0.5kg/1.1lbs”

  1. SainSmart “Red Copper” 1.75mm filament “RED COPPER”. This is PLA, and, on my printer, this particular filament REQUIRES a fairly low heat, compared to a standard PLA. I’ve been lowering the temp gradually (5C increments) and watching the quality. Down at 180C now and it’s just starting to show improvement. This is only half of a standard spool, making it fairly expensive, and understandably so. It is claimed to have 40% copper and 60% PLA. The actual color on the spool is darker than what is shown in the picture…

Comments are closed.