3D MARS Fluorescent Green PLA 1.75mm 3D Printing Filament 3D Printer Filament 1.75mm PLA,Dimensional Accuracy +/- 0.05mm,2.99LBS Filament(including spool)for Most 3D Printer & 3D Printing Pen

▷ Welcome to the world of 3D MARS for endless opportunities of innovation and design in 3D printing!

3D MARS specialize in providing value-for-money 3d printing filament to most 3d printing lover. Our filament is  1.36KG(approximately 2.9LBS, including )which meet most 3d printer owners’ need.  And  PLA (Poly Lactic Acid) is a safe green material, best for the printing of toys, model and small household items.

Hope that our filaments can enrich your experience in 3d printing industry. 

➤1.36 KG (approximately 2.9 lbs/ 390 meters) One Spool

➤ PLA (Poly lactic Acid) 3D Printer Filament Vacuumed Sealed With Desiccant

➤Spool Diameter: 7.87″ – Spool Width: 2.56″ – Spool Hub Hole Diameter: 2.16″


Material: PLA 

Diameter: 1.75mm

Density: 1.24g ± 0.05g/cm³

Tensile Strength: 48.5 MPa

Bending Strength: 82.7 MPa

Notch Impack Strength: 16 j/m

Melting Point: 150°C – 165°C

Printing Temperature: 195°C – 220°C (383°F – 428°F)

Frequently Asked Questions 

①Filaments do not extrude properly? 

A: Check the running extruder temperature is match with the temperature of the filament extrusion needed. If not, keep trying to set a appropriate temperature. 

②How do I store my filament? 

A: Sealing the filament in a dry storage can effectively prevent it brittle and crack cased by absorbing moisture from the air for a long term. 

③ Is your filament tangled? 

A: Check the spool is installed correctly.

Note: 

– For good shape, please keep your products made by pla away from the things exceeding 60 degrees. 

– Had better not use it to making thin things or impact the product made by pla because it is frail.

Product Features

  • *Gross Meter and Weight: Fluorescent Green 3d printer filament is 1.34KG(including spool, approximately 2.95 lbs) with 390 meters each
  • *3d Printer Filament 1.75: Eco-friendly Fluorescent Green filament is suitable for high precision while printing
  • *Better Smell: The air is filled with slightly sweet smell likes candy when printing
  • *Compatibility: Fluorescent Green filament works well with MakerBot, Ultimaker, 3D Pen, Prusa i3 ect
  • *+/-0.05mm Filament Diameter Tolerances:1.75mm diameter length of filament’s tight tolerance to ensure consistent feeding and stable prints

Check Out Our Website For Details…

Maven 8-Color Pack Plastic 1.75 mm ABS Filament Refills for Use with 3D Printing Pens – Black, Blue, Green, Grey, Pink, Purple, Red, and White

This set of 8 multicolored Plastic ABS Filament Refills are designed to work with our Maven 3D Printing Pen. Use them to mix up the colors of your artwork and keep the 3-dimensional fun going, whether you are designing, working or a project, or simply enjoying some leisurely doodling! Included in this pack are 8 coils of filament, one of each in black, blue, green, grey, pink, purple, red, and white. Each color measures 184 mm in length. To load your pen with a new color, insert the ABS filament into the wire loading hole at the end of the pen. Press and hold “wire loading” button to load material with your pen’s built-in motor until material comes out from the nozzle nip, indicating loading is complete. When you are ready to unload or change the filament, simply press the “wire unloading” button. Please note: Unloading the filament after each use is highly recommended. Be sure to cut the material ending smooth before loading. Package includes (8) 184mm plastic ABS filament refills, size 1.75 mm. Measures approximately 8″ x 10″ packaged. Compatible with Maven 3D Printing Pen, sold separately. Suitable for ages 8 and up. Children should be under adult supervision during use.

Product Features

  • FOR 3D PRINTING PEN: This set of 8 multicolored Plastic ABS Filament Refills are designed to work with our Maven 3D Printing Pen. Use them to mix up the colors of your artwork and keep the 3-dimensional fun going, whether you are designing, working or a project, or simply enjoying some leisurely doodling!
  • RAINBOW REFILLS: Included in this pack are 8 coils of filament, one of each in black, blue, green, grey, pink, purple, red, and white. Each color measures 184 mm in length.
  • LOADING FILAMENT: To load your pen with a new color, insert the ABS filament into the wire loading hole at the end of the pen. Press and hold “wire loading” button to load material with your pen’s built-in motor until material comes out from the nozzle nip, indicating loading is complete.
  • UNLOADING FILAMENT: When you are ready to unload or change the filament, simply press the “wire unloading” button. Please note: Unloading the filament after each use is highly recommended. Be sure to cut the material ending smooth before loading.
  • PRODUCT SPECIFICATIONS: Package includes (8) 184mm plastic ABS filament refills, size 1.75 mm. Measures approximately 8″ x 10″ packaged. Compatible with Maven 3D Printing Pen, sold separately. Suitable for ages 8 and up. Children should be under adult supervision during use.

Check Out Our Website For Details…

BuMat PLADG 1.75mm 2.2lbs Dark Green Filament Printing Material Supply Spool for 3D Printer

BuMat Filament is the best, safest, and most consistent filament for your 3D Printer. This is the highest quality components for producing successful 3D print. It is compatible with all 1.75mm Printer like Flash Forge USA, RepRap, Rapman, Makerbot, BFB 3000, Rostock, Ultimaker Printrbot, Makibox, Buccaneer, Kossel, Mendel and many other printers.

Product Features

  • 1.75mm PLA at 2.2 lb. (1KG)
  • User defined melting temperature at between 160 – 180 C
  • Diameter of the filament: 1.75mm
  • Easy to use and performs well on most prints
  • Air Tight Sealed in a plastic bag

Check Out Our Website For Details…

Color Changing with Temperature 3D Printer PLA Filament,From Green to Yellow,1.75 mm, Dimensional Accuracy +/- 0.05 mm, 1 KG Spool ( 2.2 LBS ), 3D Printing PLA Material

Diameter (Tolerance): 1.75 mm ±0.05 mm Net Weight:1000g Recommended Printing Temp: 195 – 230 °C Recommended Printing Speed: 30 – 90 mm/s Heated Bed:0 ~ 80 °C

Product Features

  • Color Chang Filament
  • From Green to Yellow
  • Colour Chang Temperature: about 31°C

Check Out Our Website For Details…