LUTIONS High Temp Tape Kapton Polyimide Tape with Silicone Adhesive 1/2″ (12mm) x 36yds for 3D Printing, Soldering, Insulating Circuit Boards & More

Features:
Polyimide tape, also known as KAPTON tape, commonly known as high temperature adhesive tape, golden finger tape is based on polyimide film as base material, imported silicone pressure sensitive adhesive.
Polyimide tape with high temperature resistance, electrical insulation, resistance to radiation, solvent-resistant, high temperature and removed without leaving adhesive residue and other characteristics. Brown high temperature polyimide film tape selection of high-temperature resistance and insulation is superb as the substrate, single-sided coating Dow Corning silicone.
High temperature tape is widely used for protecting PCB cheat site in SMT reflow and wave soldering processes of erosion-free days of lead-free solder paste, or lithium chemical environment within a fixed pole ear and other purposes.It is an ideally suited for continuous high temperature operating conditions.

Product Features

  • High Temperature Poyimide Film Tape: Also known as Kapton tape, durable and capable of withstanding long-term temperatures 500 and short-term 572 degrees Fahrenheit.
  • Easy Removal – Backed with silicone adhesive, clean easily without residue.
  • Transparent- Allows for project visibility, such as observation of circuit boards during processing, and makes perfect placement easy.
  • Applications – Electronic circuit Insulation ,High-temperature protection, Bundles and so on. Ideal for a variety of home and commercial projects like 3D printing, soldering, high-temperature powder coating, etching, and more!
  • Package included: one roll of 1/2″ x 36 yard Kapton tape.

Detailed Information available on our Homepage…

BCP Kapton Polyimide High Temp Tape with Silicone Adhesive 1/2″ (12mm) x 36yds

Features: Brown high temperature polyimide film tape selection of high-temperature resistance and insulation is superb as the substrate, single-sided coating Dow Corning silicone. Purpose: High temperature tape is widely used for protecting PCB cheat site in SMT reflow and wave soldering processes of erosion-free days of lead-free solder paste, or lithium chemical environment within a fixed pole ear and other purposes

Product Features

  • Package included: one roll of 1/2″ x 36 yard tape.
  • 1 mil polyimide film & 1.36 mil silicone adhesive
  • With excellent electrical insulation.
  • Clean removal, no residue
  • Long-term temperature: 260°C / short-term temperature: 300°C

Visit The Website For More Information…

Best 3D Printing Build Surface – 8×8 Square Bases – Bin the Blue Tape, Kapton Tape and Hairspray, No Prep 3D Printer Base

Are you having issues with adhesion during printing? Do you find that you’re prints are warping or shifting whilst you’re creating a design?
This set of four adhesive print surfaces is the answer! Their micro textured surfaces create a quick and secure bond as your first layer goes down, tightly gripping your print and giving the stability it needs to turn out perfect!

Easy to remove, once your masterpiece is complete, just slide a pallet knife or print removal tool under the edge and it’ll pop right off!

Durable and hard wearing, these surfaces will protect your print bed and keep your prints perfect for up to 100 prints each. And as we include four in each set, that’s a whole lot of printing!

Whether using a heated or unheated bed, these print surfaces create an instant, secure mechanical lock with your printout, the stability that it provides is unrivalled for printing with ABS, PLA, PETG, HIPS, PET+, brick, and flexible (TPE) filaments and as it installs as a single sheet, its far easier to create a smooth surface than using tapes, glue sticks, sprays or ABS slurry.

Specifications
Size: 8″ x 8″
Maximum Temperature: 200℃/392°F
Compatible with: E3D V6, makerbot mk8, Anet A8/A6, RepRap, mendel, Prusa i3, P3Steel 3D Drucker printer and many more 3D printers!
Extreme Hold for: ABS, PLA, HIPS, PET+, Brick, and Flexible (TPE)

Product Features

  • PRINTS STAY IN PLACE – The micro textured surface of this SET OF FOUR PRINT SURFACES instantly locks to your 3D model creating a stable base for the perfect print, no raft needed.
  • NO PREP PRINTING – Say goodbye to tape, hairspray and glue sticks, once installed and calibrated, you can print almost any filament onto your new surface without worrying about it coming unstuck.
  • CLEAN AND SIMPLE REMOVAL – At the end of a long print run, your masterpiece will jut pop right off leaving your surface ready for your next work of art!
  • MULTI PURPOSE BUILD SURFACE – These adhesive printing surfaces are great for HEATED and UNHEATED PLATES, and create a stable platform for ABS, PLA, HIPS, PET+, brick, and flexible (TPE) filaments.
  • SIMPLE TO INSTALL – The adhesive backing makes these printing sheets easy to fit, just clean your build plate, remove the backing and lay the surface smooth.

Click Here For More Information

Gizmo Dorks Kapton Tape (Polyimide) for 3D Printers and Printing, 6.25 x 6.25 inches, 10 sheets per pack

Kapton tape is the perfect accessory to cover your build platform during a 3D print. Kapton tape is made from a thin layer, 1 mil thick, of Polyimide film. The tape also has a 1 mil thick layer of silicone adhesive. Kapton tape is widely used because of it’s ability to withstand the heating and cooling of a build platform. Certain plastics such as ABS filament adhere particularly well to Kapton tape making it perfect to use when a heated build platform is required. ABS filament will have full adhesion to the Kapton tape at the high build plate temperature required, but it will also release the printed part when the bed cools. The print will be easy to peel or pop right off making Kapton tape the practical choice for any 3D printer build plate.

  • Dimensions: 6.25 inches wide by 6.25 inches wide
  • 1 mil thick Kapton layer
  • 1 mil thick silicone adhesive layer
  • 2 mil total thickness
  • Comes in a pack of 10 sheets
  • Each sheet comes on a removable protective liner

Dry Application
The dry method involves using a flat edge such as a ruler or a credit card to slowly peel and apply the tape while using the straight edge to keep the tape free from bubbles.

Wet Application
The wet method is similar to the dry method but involves spraying some soapy water underneath the Kapton tape. Remove the liquid by squeegee or a straight flat edge such as a ruler. This will also remove any air bubbles. The biggest benefit to the wet method is that you can re-position the tape while it is wet because the liquid allows you to easily slide the tape around. Let the Kapton tape fully dry before printing.

Product Features

  • Superior quality Kapton polyimide tape for 3D printing
  • Resistant to high temperatures making it perfect for plastic filaments requiring heated build beds such as ABS
  • 3D prints adhere very well especially under high heat but release cleanly when cooled
  • Great durability for multiple print cycles without needing to change the tape
  • Dimensions of 6.25 inches by 6.25 inches

Detailed Information available on our Homepage…