[Sintron] 3D Printer MK8 Extruder hotend 0.4mm Nozzle Latest Upgrade Print Head for 3D Printer Reprap Mendel MakerBot, Prusa i3 & rework (3D-MK8)

Overview:

The extruder is almost the most important part for 3D printer, also the most difficult part to calibrate. we have made necessary design to prevent “jammed” problem. I can’t emphasize anymore how important this is, other sellers don’t have this and would cause many problems.

Features:

(1)The extrude is with thermistor sensor.
(2)Compatible with ABS and PLA 1.75mm.

Tips:

While using with PLA filament, please always remember to keep the fan on, otherwise it might get jammed and ruin the hotend. PLA is more easier to get jammed, so it might require some patience to practice.
For ABS, we would also suggest to keep the fan on, as this is also better. also remember to purchase filament from good reputation seller, as the filament is very important!
( default for this is with 0.4mm nozzle, and suitable for 1.75mm filament )

Specifications:

(1)Nozzle:0.4mm
(2)Voltage:12V/24V
(3)Motor Model:SL42STH40-1204A
(4)Nozzle Flow Rate:24cc / h
(5)Thermistor Tpye:NTC 100K 3950
(6)Sports Shaft Speed:10-100mm

Motor Parameters:

(1)Model:SL42STH40-1204A
(2)Step Angle:1.8∘
(3)Rated Voltage:2.55 V
(4)Rated Current:1.7 A
(5)Phase Resistance:1.5Ω
(6)Phase Resistance:2.3 mH
(7)Number of Lead Wire:10-100mm

Product Features

  • (1)We have made necessary design to prevent “jammed” problem.
  • (2)The extrude is with thermistor sensor.
  • (3)Compatible with ABS and PLA 1.75mm.
  • (4)We not just sell them, we also provide good after-sales service, so welcome to discuss with us, we will try to do technical support as much as we can.

Click Here For More Information

[REPRAPGURU] 12864 LCD Full Graphic Smart Display Controller for RepRap RAMPS 1.4 3D Printer Mendel Prusa Arduino Mega Pololu Shield Arduino RepRap

This full graphic Smart Controller contains a SD-Card reader, an rotary encoder and a 128 x 64 dot matrix LCD display. You can easy connect it to your Ramps board using the “smart adapter” included.
After connecting this panel to your Ramps you don’t need your pc any more, the Smart Controller supplies power for your SD card. Further more all actions like calibration, axes movements can be done by just using the rotary encoder on the Smart Controller. Print your 3D designs without PC, just with a g-code design stored on the SD card.
Features
(1) Using a large screen 12864LCD.
(2) With a SD card base on back, put slicing file into the SD card and select the file on the LCD, then can be printing.
(3) Product comes encoder parameter adjustment can be achieved, and the file selection print.
(4) Plug and play on the RAMPS, but need to modify the firmware to support.
Package List Includes
(1) LCD 12864 Smart Controller x 1
(2) Smart Adapter x 1
(3) 30cm FC Cable x 2

Product Features

  • USA Customer Support
  • Print from SD card
  • Plug and play on the RAMPS 1.4, (with supporting firmware)
  • Using a larger screen 128X64

Detailed Information available on our Homepage…

8pcs GT2 16T Bore 5mm Timing Pulley+ 5 Meters Belt For RepRap Prusa Mendel 3D Printer GT16 Teeth

8pcs GT2 16T Bore 5mm Timing Pulley+ 5m Belt For RepRap Prusa Mendel 3D Printer

Product Features

  • GT2 Pulley : Teeth Number :16, Flange Double, Material Aluminium
  • Teeth Pitch 2mm , Diameter of Bore 5mm
  • Teeth Width 7.5mm(Very Suitable and good for 6mm synchronous belt)
  • GT2 Belt: Color Black, Pitch 2mm, Width 6mm
  • Material Fiber Reinforced Rubber, Length 5Meters

Detailed Information available on our Homepage…

Prusa Mendel Hardware Kit fastener Set Nut Washer Bolt Grub Screw for 3D Printer Waynetool

This is a fastener set for a Reprap Prusa Mendel i2 3D printer DIY kit. All screws are Phillips Head. Much easier to work with in tight spaces than hex head bolts. Package includes: M2.5 x 16 stainless steel Phillips Head Screws:6pcs M3 x 10 stainless steel Phillips Head Screws:20pcs M3 x 20 stainless steel Phillips Head Screws:50pcs M3 x 30 stainless steel Phillips Head Screws:5pcs M3 x 40 stainless steel Phillips Head Screws:5pcs M3 x 50 stainless steel Phillips Head Screws:4pcs M2.5 stainless steel Hex Nuts: 6pcs M3 stainless steel Hex Nuts: 50pcs M8 stainless steel Hex Nuts: 50pcs for frame assembly M2.5 stainless steel Flat Washers: 6pcs M3 stainless steel Flat Washers:50pcs M8 stainless steel Flat Washers:50pcs for frame assembly M3 x 8 stainless steel Grub Screws:3pcs M8 x 20 Grub Screws: 1pc M8 x 50 Grub Screws: 1pc Item will be shipped by airmail within 24 hours after full payment is received.

Visit The Website For More Information…