ARQQ Heat Bed Mosfet Tube Hot Bed Power Module Expansion for 3D Printer Heating Bed Accessories(Pack of 2)

Details: Dimensions: 60*50mm
Net Weight: 40g
Color:Black
Max Current: 25A(Enhance heat dissipation)
Wire’s color is random

Summary:
1. Remove basically all ouside screws for your anet a8 control box
2. Take pictures of existing board wiring
3. Unscrew two large 12/14GA wires on the board labeled “hot bed”
4. Screw these two wires into the new mosfet board labled “hot bed”
5. Connect the small jumper wires (white) to the control board where you just removed the two wires and screw them down. Note the polarity on each board. Match (+) to (+) and (-) to (-)
6. FInd 2x 6-8″ pieces of 12 or 14 AWG wire. Most cheap extension cords are 16AWG (too thin). Your local home depot / menards / ace will have this as cut-to-length
7. Run one of the 6″ wires to the power supply (+), screw in; and the other side to the (+) DC IN on the new mosfet board. Repeat for the negative wire (-) to (-)
8. Many people use velcro to secure the new board to the top of the control box. Others print off a holder from thingiverse
9. Put everything back together
10. When complete, you’ll see a blue light activate for signal from inside the box when the bed heater is activated by the control board

Package Included:
2xHot bed MOS Tube Power Module Expansion

Product Features

  • Work with anet a8 3d printer heat bed
  • Completely solve the hot bed power is too large and the load current issue
  • Under the premise of normal cooling, it work stable under I(Max)=25A, the current must not exceed 25A while the process working
  • General Add-on Heated Bed Power Expansion Module
  • Note: Any issue please contact us before, we will always here to help!

Detailed Information available on our Homepage…

12V 30A 360W Switching Power Supply Universal for CCTV Radio ComputerTransformer Adapter Prusa I3 3D Printer Comgrow

Parameter

Input: AC 110V/220V 50/60Hz
Output : DC 12V 30A 360W max
Working temperature: -10 to 50 degree Celsius
Storage temperature: -20 to 60 degree Celsius
Environmental humidity: 10-95%
Material: Metal, Electronic Parts
Safety Compliance: FCC/ CE
Connection instruction

L/N: AC power input
+V: DC power output “+”
COM: DC power output “-”
+V ADJ: Adjust the output voltage (15%)
Net weight: 760g

Product Features

  • 12V 30A 360W power supply
  • Built-in cooling fan for 3D Printer
  • In-Door Use Only
  • Please choose the input voltage (110V/220V) by switch before use to avoid damage.
  • High quality widely used in Industrial automation, LED display, communications, etc.

Visit The Website For More Information…

ARQQ Heat Bed Mosfet Tube Hot Bed Power Module Expansion for 3D Printer Heating Bed Accessories

Details: Dimensions: 60*50mm
Net Weight: 40g
Color:Black
Max Current: 25A(Enhance heat dissipation)
Wire’s color is random

Summary:
1. Remove basically all ouside screws for your anet a8 control box
2. Take pictures of existing board wiring
3. Unscrew two large 12/14GA wires on the board labeled “hot bed”
4. Screw these two wires into the new mosfet board labled “hot bed”
5. Connect the small jumper wires (white) to the control board where you just removed the two wires and screw them down. Note the polarity on each board. Match (+) to (+) and (-) to (-)
6. FInd 2x 6-8″ pieces of 12 or 14 AWG wire. Most cheap extension cords are 16AWG (too thin). Your local home depot / menards / ace will have this as cut-to-length
7. Run one of the 6″ wires to the power supply (+), screw in; and the other side to the (+) DC IN on the new mosfet board. Repeat for the negative wire (-) to (-)
8. Many people use velcro to secure the new board to the top of the control box. Others print off a holder from thingiverse
9. Put everything back together
10. When complete, you’ll see a blue light activate for signal from inside the box when the bed heater is activated by the control board

Package Included:
1xHot bed MOS Tube Power Module Expansion

Product Features

  • Work with anet a8 3d printer heat bed
  • Completely solve the hot bed power is too large and the load current issue
  • Under the premise of normal cooling, it work stable under I(Max)=25A, the current must not exceed 25A while the process working
  • General Add-on Heated Bed Power Expansion Module

Detailed Information available on our Homepage…

3D Pen For Kids ,Newest 3D Printing Pen Compatible ABS PLA Filament, KT-PRASE Portable 3D Printer Drawing Pen LCD Screen Supports Mobile Power (Blue)

So many 3D pen on the market, why choose our 3D pen?
2017 Upgraded Version New generation KT-PRASE 3D pen,In the previous generations of pen on the basis of more perfect, more stable performance, the operation is more simple, 3D pen Help Kids developing artistic skills, spatial thinking, to encourage kids’ creative imaginations.
Power parameter:5V 2A
Support filament:1.75mmPLA/ABS
Working temperature:60-245℃
❤Filament Material:
3D Pen is suitable for both 1.75mm ABS & PLA Filament. We recommend using 1.75mm PLA filament,which is more eco-friendly,PLA Filament is non-toxic and odorless,safer ,and tend to be widely-used filaments
❤Ceramic Nozzle:
Ceramic Nozzle much safer compared to copper nozzle from other manufacturers,safe and toxic free
❤To Prevent Clogging:
If the blockage, the pen section of the front area to open, and then the pen inside the supplies taken out on the line, easy to operate
❤Safety Warnings:
Failure to follow these warnings can result in injury or product damage.
√This equipment is suitable for children and adults, children need to be used in the adult in the adult guardianship
√Do not touch the extruding nib (nozzle) during use.and Do not touch the nozzle before the 3D printing pen has time to cool.
√The nozzle and its vicinity are high temperature danger areas, so it is strictly forbidden to touch, or touch the other items with a pen tip during use
√PLEASE unload the filament after use and turn off the power.
❤ KT-PRASE Service guarantee
Kentprase devotes providing the best product and service to customers.
If you have any questions or concerns for this 3D pen, Please contact us,Thank you.
❤Package Includes:
1 x 3D Printing Pen
1 x Operation instruction booklet
1 x Power Adapter
1 x Power cord
1xMulti-Color 20 Meters 1.75mm PLA Filament

Product Features

  • ❤SUPPORTS MOBILE POWER-This 3D pen supports mobile power supply, anywhere can use mobile power, more secure, more convenient, and sometimes you want to use the pen, but can not find the power outlet, this time you can use mobile power supply, At any time you can carry out your creation
  • ❤PLA/ABS FILAMENT- This 3D printing pen is capable of using 1.75mm PLA and ABS filame, PLA Filament is non-toxic and odorless,safer ,and tend to be widely-used filaments.Please do not use with PCL filament.
  • ❤CONTROL SPEED-Printing speed: 0-120cm / min,This 3D printing pen is light and slim, easier to handle. you can crank up the extrusion speed for larger fill in areas and turn it down slow to create intricate works of art Adjustable feed lets you regulate speed & flow for optimal control of material,So that the operation more stable and more convenient
  • ❤ADJUSTABLE TEMPERATURE- Working temperature,60-245℃,This 3D printing pen has hot melt extrusion molding and allows you to easily adjust the temperature in one degree increments from 60C to 245 ℃. You can keep track of the current temperature by looking at the convenient OLED display for optimal fine-tuning.
  • ❤EASIEST 3D PRINTER PEN – ONE BUTTON CONTROLS EVERYTHING, Ergonomically designed 3D drawing pen is easiest to handle, and simplest to operate, making designing brilliant 3d art childs play! Simply pick it up, click the button.Ceramic nozzle releases filament exactly where you want it. Then click it again to pause! the system automatically standby, if no operation within 2 minutes, the system automatically sleep, so more secure and convenient!

Click Here For More Information