Turnigy Blue 3D Printer Bed Tape Sheets 200 x 200mm (20pcs)

Keeping your models held firmly on your print bed is crucial to getting a high quality print and blue masking tape is widely acknowledged to be one of the best ways of achieving this.Our blue 3D printer tape is incredibly durable and can be used many times before it needs to be replaced. It also comes in convenient sized sheets to eliminate the tedious task of having to line up all of the edges as you would with conventional masking tape.Features: One of the best ways to secure models to the print bed Easy to apply and remove Durable Convenient sizeSpecs:Sheet size: 200 x 200mm (Ideal for the Print-Rite DIY 3D Printer)

Product Features

  • BOOOLE INC. researches and develops electronic products and open source hardware with the aim of promoting MAKER SPACE and DIY practice. It makes you believe innovation and invention are no more exclusive to scientific research institutes.

Detailed Information available on our Homepage…

Gizmo Dorks Kapton Tape (Polyimide) for 3D Printers and Printing, 6.25 x 6.25 inches, 10 sheets per pack

Kapton tape is the perfect accessory to cover your build platform during a 3D print. Kapton tape is made from a thin layer, 1 mil thick, of Polyimide film. The tape also has a 1 mil thick layer of silicone adhesive. Kapton tape is widely used because of it’s ability to withstand the heating and cooling of a build platform. Certain plastics such as ABS filament adhere particularly well to Kapton tape making it perfect to use when a heated build platform is required. ABS filament will have full adhesion to the Kapton tape at the high build plate temperature required, but it will also release the printed part when the bed cools. The print will be easy to peel or pop right off making Kapton tape the practical choice for any 3D printer build plate.

  • Dimensions: 6.25 inches wide by 6.25 inches wide
  • 1 mil thick Kapton layer
  • 1 mil thick silicone adhesive layer
  • 2 mil total thickness
  • Comes in a pack of 10 sheets
  • Each sheet comes on a removable protective liner

Dry Application
The dry method involves using a flat edge such as a ruler or a credit card to slowly peel and apply the tape while using the straight edge to keep the tape free from bubbles.

Wet Application
The wet method is similar to the dry method but involves spraying some soapy water underneath the Kapton tape. Remove the liquid by squeegee or a straight flat edge such as a ruler. This will also remove any air bubbles. The biggest benefit to the wet method is that you can re-position the tape while it is wet because the liquid allows you to easily slide the tape around. Let the Kapton tape fully dry before printing.

Product Features

  • Superior quality Kapton polyimide tape for 3D printing
  • Resistant to high temperatures making it perfect for plastic filaments requiring heated build beds such as ABS
  • 3D prints adhere very well especially under high heat but release cleanly when cooled
  • Great durability for multiple print cycles without needing to change the tape
  • Dimensions of 6.25 inches by 6.25 inches

Detailed Information available on our Homepage…

Gizmo Dorks Polyester Film PET Tape for 3D Printers and Printing, 8 x 8 inches, 10 sheets per pack

Gizmo Dorks PET tape is the premier tape adhesive to use on heated build platforms. PET tape, which is made out of Polyester film, is used on 3D beds because of its ability to withstand high temperatures that are sometimes required depending on the plastic used. ABS filament, for example, adheres particularly well to PET tape, maybe even better than the traditional Kapton tape. Heat transfers particularly well through PET tape making it a perfect complement to ABS which requires a heated build platform, typically around 110�C. PET tape, which is typically green, is also more durable than Kapton tape which results in less tears. Green PET tape is easily removed without leaving behind any residue. The tape has a max upper temperature of 220�C.

  • Dimensions: 8 inches by 8 inches
  • Polyester film layer: 1 mil thick
  • Silicone adhesive: 1 mil thick
  • Total thickness: 2 mil
  • Comes in a pack of 10 sheets
  • Each sheet comes on a removable protective liner
  • The tape can be cut down easily to fit any size shape
  • Other sizes ranging from 6 to 12 inch widths are available

Dry Application
The dry method involves using a flat edge such as a ruler or a credit card to slowly peel and apply the tape while using the straight edge to keep the tape free from bubbles.

Wet Application
The wet method is similar to the dry method but involves spraying some soapy water underneath the PET tape. Remove the liquid by squeegee or a straight flat edge such as a ruler. This will also remove any air bubbles. The biggest benefit to the wet method is that you can re-position the tape while it is wet because the liquid allows you to easily slide the tape around. Let the PET tape fully dry before printing.

Product Features

  • Premium grade polyester PET tape for 3D printing
  • Excellent adhesion to many 3d filament types such as PLA and ABS
  • PET tape can be used for many 3D print cycles with greater durability than Kapton
  • PET film layer is 1 mil thick with a 1 mil thick adhesive layer
  • Dimensions of 8 x 8 inches, can be cut to size easily

Check Out Our Website For Details…

Gizmo Dorks Polyester Film PET Tape for 3D Printers and Printing, 6.25 x 6.25 inches, 10 sheets per pack

Gizmo Dorks PET tape is the premier tape adhesive to use on heated build platforms. PET tape, which is made out of Polyester film, is used on 3D beds because of its ability to withstand high temperatures that are sometimes required depending on the plastic used. ABS filament, for example, adheres particularly well to PET tape, maybe even better than the traditional Kapton tape. Heat transfers particularly well through PET tape making it a perfect complement to ABS which requires a heated build platform, typically around 110�C. PET tape, which is typically green, is also more durable than Kapton tape which results in less tears. Green PET tape is easily removed without leaving behind any residue. The tape has a max upper temperature of 220�C.

  • Dimensions: 6.25 inches by 6.25 inches
  • Polyester film layer: 1 mil thick
  • Silicone adhesive: 1 mil thick
  • Total thickness: 2 mil
  • Comes in a pack of 10 sheets
  • Each sheet comes on a removable protective liner
  • The tape can be cut down easily to fit any size shape
  • Other sizes ranging from 6 to 12 inch widths are available

Dry Application
The dry method involves using a flat edge such as a ruler or a credit card to slowly peel and apply the tape while using the straight edge to keep the tape free from bubbles.

Wet Application
The wet method is similar to the dry method but involves spraying some soapy water underneath the PET tape. Remove the liquid by squeegee or a straight flat edge such as a ruler. This will also remove any air bubbles. The biggest benefit to the wet method is that you can re-position the tape while it is wet because the liquid allows you to easily slide the tape around. Let the PET tape fully dry before printing.

Product Features

  • Premium grade polyester PET tape for 3D printing
  • Excellent adhesion to many 3d filament types such as PLA and ABS
  • PET tape can be used for many 3D print cycles with greater durability than Kapton
  • PET film layer is 1 mil thick with a 1 mil thick adhesive layer
  • Dimensions of 6.25 x 6.25 inches, can be cut to size easily

Detailed Information available on our Homepage…