HICTOP Assembled Extruder Hot End for Creality CR-10 3D Printer 1.75mm Filament, 0.4mm Nozzle, 12V 40W Heater, NTC Thermistor Hotend

Product Features
Material: Aluminum & Stainless Steel & Brass
Installation type: external thread connection
Scope of application: 3D printer
Nozzle size: 0.4mm
Throat pipe length: 30mm
Operating temperature range: -40 ~ +260°C (-40 ~ +500 °F)

Package included:
1x Aluminum block
1x Heating tube (12V 40W)
1x 1.75MM 0.4MM Brass Nozzle
1x M6*30mm Throat pipe (built-in kit)
1x Thermistor
2x High temp tape 1x pliers
1x Teflon tube

Warning!!
Small parts, keep away from children

Product Features

  • 100% brand new and high quality.
  • Tip of the nozzle, aluminum heating block, Throat pipe (built-in kit).
  • MK8 Extruder Hot End kit, white wire was temperature thermistor, red wire was heating tube 12V40W.

Visit The Website For More Information…

3D Printer Parts for Improved E3D Cyclops 2 In 1 Out Hotend Kit with Thermistor and Cartridge Heater Red Color 0.4mm/1.75mm YES

Note: 1. This listing is 0.4mm/1.75mm, and with PTFE tube inside. Please let us know if you need other sizes, or the one without PTFE tube. 2. The default shipping of the heater is 12V 40W. Please leave us message if you need the one of 24V 40W. The main body of the hotend kit is of high purity aviation aluminum, and they are produced by the CNC machine that imported from German. Also for the appearance of the product, we find the anode surface treatment manufacturer to make two colors that are different from other similar products to ensure the uniqueness of the product. To improve the assembly and radiating with new appearance, which enhances the effective life of the hotend kit, and also contributes to the maintenance and replacement. Tips for radiating of the 2 in 1 out and 2 in 2 out hotend kits: Due to double pipes, the measured temperature is two times than that of single head. Therefore, customer need to take ancillary action for radiating of the heat sink block, or it will probably cause blocking, especially in summer when the temperature is high. 1. Please keep the room temperature be not too high, 2. The recommended temperature of PLA: 185-200 degrees in summer, and 195-215 degrees in winter. 3. We recommend to add the high-quality dual ball bearing 11000 rbm fan for assisted cooling (the speed is three times higher than that of similar products in the market.)

Product Features

  • Model Number:E3D
  • Application:3D Printing
  • Type:2 in 1 out

Visit The Website For More Information…

Aibecy NTC 3950 100K ohm Thermistor Sensor with 1.1m Cable for RepRap Prusa i3 Anet 3D Printer Kit Replacement Parts

Features:
NTC pre-wired thermistor for most 3D printers heat bed & extruder.
100K ohm temperature sensor.
3P terminal for connecting.
With 1.1m long high temperature insulated wire.
Durable material for long life.

Specifications:
Material: High Temperature Teflon(200°C)
Resistance: at 25°C=100K ohm
Cable Length: Approx. 1.1m
Working Temperature Range: -40°C~+300°C
Package Size: 7 * 5 * 1cm / 2.8 * 2 * 0.4in
Package Weight: 8g / 0.3oz

Package List:
1 * Thermistor

Note:
The item only includes the thermistor.

Product Features

  • NTC pre-wired thermistor for most 3D printers heat bed & extruder.
  • 100K ohm temperature sensor.
  • 3P terminal for connecting.
  • With 1.1m long high temperature insulated wire.
  • Durable material for long life.

Visit The Website For More Information…

MK2B Heated Bed, NTC 3950 Thermistor & Borosilicate Glass Combo

Complete set: 214mm x 214mm MK2B with soldered thermistor, soldered power cord and 214mm x 200mm borosilicate glass plate.

Product Features

  • MK2B: 214mm x 214 mm (8.4 in x 8.4 in) 12V or 24V Heated Bed for MakerBot RepRap UP Mendel I3 Printer
  • Thermistor included: 100K ohm NTC 3950, soldered and installed
  • Borodilicate Glass: 3mm thick, 214mm x 200mm, will not interfere with MK2B mounting screws
  • Soldered power leads
  • Red soldermask and white silkscreen on both sides

Visit The Website For More Information…