3D Printing Utility Tool 3 Piece Set

Our precision 3D print utility tool Collection has all 3 of our popular 3D Print Utility Tools:
3D Printing Utility Tool #1 – Blade / Angled Spatula Combo
3D Printing Utility Tool #2 – Pick and Precision Blade for Support Removal in Hidden and otherwise Tight Areas …
3D Printing Utility Tool #3 A sharpened stainless steel “shovel” end, (9.6mm) one end and a narrow ((6.2mm) shovel end on the other, This tool is designed to cut and pry support material from 3D prints and a precision print removal tool.
Also sold individually
3D Printing Utility Tool #1 – Blade / Angled Spatula Combo Search ASIN B075H345VK
3D Printing Utility Tool #2 – Pick and Precision Blade for Support Removal in Hidden and otherwise Tight Areas Search ASIN B075G2KXRS
3D Printing Utility Tool #3 – End Sharpened Wide Blade / Narrow Tapered Blade Combination -Cut and Pry Support from 3D Prints Search ASIN B075G3R4HD

Product Features

  • 3 Great general Utility Tools for 3D Printers and 3D Model Clean-up – three tools designed to remove & clean up 3D Prints
  • Our 3 most popular tools #1 – Blade / Angled Spatula Combo, :#2 – Pick/ Precision Blade Combo. #3 – End Sharpened Wide Blade / Narrow Tapered Blade Combo
  • Precision made stainless steel ends with comfortable stained and polished wooden handle.
  • Strong, Durable, High Quality tools!

Check Out Our Website For Details…

3D Printer Kit Clogged E3D J-Head Extruder Nozzle (2each) .6mm .8mm 1.0mm + Tool for 1.75mm filament ABS PLA

J-Head 3D Printer Kit Extruder Nozzle Head Cleaner Bits 1 each (2each) .6mm .8mm 1.0mm + bit holding pin-vise

THE BITS: These Micro-drill bit Extruder Nozzle Cleaners are an essential item for any 3D printer owner. Every extruder nozzle must be cleaned out from time to time. These nozzles are very difficult to clean properly. These micro drill bits are of the highest quality, made in Japan. They are the perfect tool for the job. By using these precision drill bits, you will extend the life of your nozzle and without a doubt, produce finer prints. If you need another size or have any questions, contact us and we will take care of you.

THE TOOL
This multi-functional tool is perfect for hand cleaning the nozzle head to your 3D printer. You can use a drill to do the job, but the hand held tool is more safe. The high speeds of electric drills can cause damage to the nozzle head if the user does not have very steady hands. This tool is very easy to hold and compact at 3.5″ long.

Product Features

  • Will clear nozzles and produce finer prints
  • Shipped in protective plastic case
  • J-Head and Standard Nozzle Print Quality Solution
  • 3.5″ Bit Holding Pin Vise with 3.175mm and 2.0mm chuck
  • More sizes available

Visit The Website For More Information…

Teenitor 3D Print Removal Tools with Sturdy Wooden Handle, Tool Kit for 3D Printer Spatula Palette Knife Painting Enhanced Version Pack of 5

Weight:0.12kg Material: Stainless steel with wooden handle Color: Brown A great tool for your 3D printer-Stiff, flexible,rigid,functional,effective with 5 pieces, this set of tool minimizes damage to the printing surface.At the same time, the thicker neck is useful for removing rafts and for trimming off supports Directions for Use To remove prints off the bed, work the edge of the tool under a corner of the print, approximately half way between the tip of the blade and the handle. Next, use a sawing motion to get the tool under the rest of the print to separate it from the bed. Tilting or twisting the blade slightly will help speed up the lifting of the print. When tilting the blade, twist the handle counter-clockwise if you’re working from the right side of the print. (If you are left-handed and starting from the left, twist the tool clockwise) If you cannot get the blade under the print to start, bring the left edge of the tool against a right-side corner of the print and twist the handle clockwise. Repeat until the corner lifts up enough to allow the blade to start getting under the print If the print is firmly stuck to the print bed, try pushing the tool so that the handle is closer to the print. This brings the thicker part of the blade (closest to the handle) under the object and acts as a wedge to help pry the part up. Wiggle the blade loose and repeat If the print is stuck too firmly to remove with the tool, you may need to slightly increase your starting nozzle elevation. The idea is to have the print stick firmly to the bed during printing, but still be removed with the tool

Product Features

  • Enhanced version pack of 5: it includes 5 sizes.you can choose a suitble one to help with prying out printed items.
  • Thicker neck,not bent easily:It needs to be just a bit stiffer to loosen a stubborn print,but it doesn’t damaged any of your projects your my printer bed by using it.
  • Fantastic and versatile:Although it’s marketed as a 3D print removal tool,it also very useful for removing stickers and scraping the small amounts of filament you tend to get stuck on the bed from not having a level bed, and it helped remove the painters tape residue left from the tape.Works very well to remove freshly printed parts
  • Durable and stiff: Note that this isn’t made for prying the print off the bed like you would use a putty knife. It’s more for sliding under the print and unsticking as you go, or perhaps slipping the middle under the print and “sawing” the print off. It’s thin and flimsy which lets it get under the print, but not TOO flimsy – it’s also thick enough to be durable, assuming you aren’t prying. Prying would definitely ruin this tool.This tool is that much better than trying to use something else
  • Flexible and effective:This 3D Print Removal Tool Works super well,A must have for a 3D printer. It’s great for getting prints off your print surface without damaging their bases.it is very simple and extremely effective. Seems to be very well constructed and the blade is flexible but doesn’t get bent up easily;it has a very flat top which makes removing models really easy.

Click Here If You Need More Detailed Info…

Creozone 3D Printer Tool 3D Print Removal Tool Steel Spatula, Professional 3D Printer Accessories

This is Creozone special design removal tool for 3D printing.

Product Features

  • Professional 3D print removal tool
  • Wood grain handle and stainless steel knife
  • This 3D print removal tool can help you easy get the prints off from the build surface
  • Will not scratch build surface
  • Net Weight: 2.4 ounce

Detailed Information available on our Homepage…