Maven 8-Color Pack Plastic 1.75 mm ABS Filament Refills for Use with 3D Printing Pens – Black, Blue, Green, Grey, Pink, Purple, Red, and White

This set of 8 multicolored Plastic ABS Filament Refills are designed to work with our Maven 3D Printing Pen. Use them to mix up the colors of your artwork and keep the 3-dimensional fun going, whether you are designing, working or a project, or simply enjoying some leisurely doodling! Included in this pack are 8 coils of filament, one of each in black, blue, green, grey, pink, purple, red, and white. Each color measures 184 mm in length. To load your pen with a new color, insert the ABS filament into the wire loading hole at the end of the pen. Press and hold “wire loading” button to load material with your pen’s built-in motor until material comes out from the nozzle nip, indicating loading is complete. When you are ready to unload or change the filament, simply press the “wire unloading” button. Please note: Unloading the filament after each use is highly recommended. Be sure to cut the material ending smooth before loading. Package includes (8) 184mm plastic ABS filament refills, size 1.75 mm. Measures approximately 8″ x 10″ packaged. Compatible with Maven 3D Printing Pen, sold separately. Suitable for ages 8 and up. Children should be under adult supervision during use.

Product Features

  • FOR 3D PRINTING PEN: This set of 8 multicolored Plastic ABS Filament Refills are designed to work with our Maven 3D Printing Pen. Use them to mix up the colors of your artwork and keep the 3-dimensional fun going, whether you are designing, working or a project, or simply enjoying some leisurely doodling!
  • RAINBOW REFILLS: Included in this pack are 8 coils of filament, one of each in black, blue, green, grey, pink, purple, red, and white. Each color measures 184 mm in length.
  • LOADING FILAMENT: To load your pen with a new color, insert the ABS filament into the wire loading hole at the end of the pen. Press and hold “wire loading” button to load material with your pen’s built-in motor until material comes out from the nozzle nip, indicating loading is complete.
  • UNLOADING FILAMENT: When you are ready to unload or change the filament, simply press the “wire unloading” button. Please note: Unloading the filament after each use is highly recommended. Be sure to cut the material ending smooth before loading.
  • PRODUCT SPECIFICATIONS: Package includes (8) 184mm plastic ABS filament refills, size 1.75 mm. Measures approximately 8″ x 10″ packaged. Compatible with Maven 3D Printing Pen, sold separately. Suitable for ages 8 and up. Children should be under adult supervision during use.

Check Out Our Website For Details…

3D printing filament tough T-ABS 1.75mm 1kg(2.2LB) -Perfect Printing material- Top Dimensional Accuracy +/-0.02mm – Compatible With All Major 3D Printers & 3D Printing Pen+competitive price (white)

ABS parameter:Color: whiteDensity:1.02g/Glass transition temperature:93℃Melt index:4.2-6.2g/10minSolubility:Insoluble in water,soluble in chloroform,tetrahydrofuran(THF) and so onTensile strength:32.3±1.2MpaElongation at break:10.2±1.2%Bending modulus:2271.5±207MpaBending strength:65.6±3.1MpaImpact strength:11.8±0.7KJ/ All testing specimens are printed using a 3D printing machine under 7 following conditions:printing temperature=230℃,printing speed=80mm/s,number of shells=2,Nozzle size=0.4mm,100% infillRecommended printing temperature:220-240℃Recommended printing speed:30-100mm/sRecommended Heated bed temperature:100-120℃Layer Height:0.1-0.2mm Infill:As needed up to 100%Matters need attention:Heat preservationTolerance:±0.02mmCertificate:SGS ROHSBox size:25*20*7cmShipping weight:1.3KG

Product Features

  • ABS is common plastic usded for 3D printing, and is widely used on the entry-level FDM 3D printers in filament form. It is a particularly strong plastic and comes in a wide range of colour. ABS has a glass transition zone. ABS can be printed very quickly.
  • ABS is great for wearables due to it’s resilience. And we are professional in producing ABS Filaments. Our ABS filaments have melting stable, diameter of filament controlled in 0.3mm+/-. priting smoothly, 100% without bubbles, good tenacity, high strength. SGS tested, RoHS compliant
  • Our ABS filament have been tested by Makerbot China Distributor and it is highly appreciated for its high quality and good printing result .
  • We have sophisticated production equipment, which are customized dedicated type 35 and type 45 production line for 3D printer fialments. During production process, whatever labors or machine, diameter of filament are controlled by 0.3+/-
  • We chose high grade ABS raw materials,This is the really high precision ABS material, Toughness is 6 times higher than the ordinary ABS , mobility 6 times higher, high adhesion, no warped edges, no broken, suitable for large model printing.

Check Out Our Website For Details…

3D Printer PLA Filament-1KG 1.75mm -White 3D Pen Filament, Dimensional Accuracy +/- 0.02mm,2.2 pound Spool for Monoprice, FlashForge, MakerBot, Reprap Guru, Einstart, HICTOP, ALUNAR and etc

Satisfaction Guarantee and 30 Days Term-less Return:

Your money will fully be returned back within 30 days since purchasing day if you are not satisfied this 3D PLA FILAMENTS!

High-quality 1kg 3D PEN Filaments Keep Printing Smoothly
Specifications:
Material: PLA filament
PLA extrusion temperature: 374-446℉ (190℃-230℃)
Dimensions: diameter 1.75mm(0.07 inch)

Compatible with any 3D Printer that uses 1.75mm diameter filament including: AirWolf,Monoprice, FlashForge, MakerBot, Reprap Guru, Einstart, HICTOP,ALUNAR, Qidi Technology, Dremel DigiLab 3D20 3D Printer, Aleph Objects, BCN3D, Beeverycreative, BigBox, CEL Robox, colorFabb, CraftBot, CraftUnique, CubePro, Cubicon, Doob, Dremel, e-NABLE, E3D, FlashForge, Kossel, Lulzbot, MakerBot, Makergear, Markforged, New Matter, Ooznest, OrdBot, PowerSpec, Printrbot, Prusa, Prusa Research, Robo 3D, SeeMeCNC, Simplify3D, SOLS, Ultimaker, XYZprinting, Zenith, Zortrax and etc.

Product Features

  • 🎨[Non-Toxic and Eco-Friendly] – Compared to ABS, PLA Filament is Non-Toxic and Eco-Friendly, safer to kids
  • 🎨[Get 10% off When Purchase Our 3D Pen] – Compatible with our 3D pen [ASIN:B01N7RZFTY]. Get the PLA filament 10% off when you purchase our 3D Pen [ASIN:B01N7RZFTY]
  • 🎨[1.75 MM FILAMENT] – Universal compatible with most 1.75 mm 3D pens and printers(Dimensional Accuracy +/- 0.02 mm). Please make sure your pen or printer could use 1.75 mm diameter PLA filament refills
  • 🎨[Unique White Color] -A great gift set for your kids and art lover to have fun with crafting and drawing. Compatible with Monoprice, FlashForge, MakerBot, Reprap Guru, Einstart, HICTOP,ALUNAR, Qidi Technology, Dremel DigiLab 3D20 3D Printer and etc.
  • 🎨[100% SATISFACTION GUARANTEE] – 30 days free replacement/refund.Any question contact us via us.services@goodrvm.com

Click Here For More Information

Iglide I180-1.75-250 Tribo 3D Printing Filament, 1.75 mm Diameter, 250 g Spool Weight, White

igus presents world’s first tribo-filament for 3D printers. New material is up to 50 times more abrasion-resistant than conventional 3D printer materials igus has been researching the 3D printer filament field to provide its customers with even more flexibility. For instance, they can design custom parts or manufacture prototypes while simultaneously relying on the tested service life of igus materials. The product, which has been tested countless times in the igus in-house testing lab, is the first filament for 3D printers specifically developed for dynamic applications. This new filament gives customers more flexibility for the design of their bearings, even prototypes can be produced relatively cost-effectively and quickly. igus’ online 3D-CAD library provides access to readily available 3D models for igus products in STL formats, which can be downloaded and directly used as input data for 3D printing. The filament will be produced with spool diameters of 1.75 mm. The material “iglide I170-PF”, developed by igus, was developed and tested solely for the “Fused-Deposition-Modeling” (FDM) manufacturing method. Further processing instructions: When feeding the filament, the redirection should not be too tight, i.e. the radius should not be less than 50 mm.

Product Features

  • iglide I170 with 1.75 mm diameter
  • 250 gram spool
  • Offers 50% more wear resistance when compared to typical filament materials

Check Out Our Website For Details…