XCSOURCE 1.75mm 3D Printer Filament Detection Sensor Module Filament Run Out Pause Monitor for 3D Printer DIY Kit TE720

Normally, 3D printer DIY kit is not able to detect running out of filament, it will continue to print until printed file is finished even if the filament has already run out. This always leads to incomplete printing which will be wasting of your time and filament.

Features:
Newly designed smart module for detecting the status of the use of filament.
To check the filament is whether run out or not, it automatically stops the 3D Printer when the filament runs out, so you will have a chance to supplement the filament which makes sure you won’t print a incomplete printing.
Built-in wearable copper in the feed inlet and outlet to extend the life span.

Specifications:
Filament Size: 1.75mm
Mounting Hole Size: 3.5mm
Mounting Hole Distance: 20mm
Cable Length: 1m
Dimension: 38 x 30 x 12.7mm

Instruction:
1. When you are using a Lerdge brand motherboard: The green light on the motherboard will turn off when the filament runs out, the motherboard will stop printing until you supplement the filament and continue printing. (Please connect to the M-sensor Interface)
2. When you are using other brand motherboard: The Detection Module uses the level transition detection method. While there still have filament in the module, the detection port shows as high level; when there is no filament in the module, the detection port will transform to low level as “Filament Run Out Command” which will stop the printing, so you will have time to supplement the filament and continue printing.

Package Includes:
1 x Filament Detection Module
1 x Cable

Product Features

  • Normally, 3D printer DIY kit is not able to detect running out of filament, it will continue to print until printed file is finished even if the filament has already run out. This always leads to incomplete printing which will be wasting of your time and filament.
  • Newly designed smart module for detecting the status of the filament.
  • To check the filament is whether run out or not, it automatically stops the 3D Printer when the filament runs out, so you will have a chance to supplement the filament which makes sure you won’t print a incomplete printing.
  • Built-in wearable copper in the feed inlet and outlet to extend the life span.
  • Filament Size: 1.75mm

Click Here If You Need More Detailed Info…

Published by

Best 3D Printer Specialist

3D Printing. The next Goldrush is on it´s way. Inside information on how to start printing in 3D, where to buy Printers, how to use them, and the newest Pictures and reviews of available 3D Printers.

One thought on “XCSOURCE 1.75mm 3D Printer Filament Detection Sensor Module Filament Run Out Pause Monitor for 3D Printer DIY Kit TE720”

Leave a Reply

Your email address will not be published. Required fields are marked *